Bio-C8 phase is made of monomeric and fully endcapped chemistry. The uniform stationary phase allows the separation to achieve high selectivity and high efficiency. Bio-C8 packings of 300 Å pore size selection are ideal for high resolution mapping of peptides and separation of natural and synthetic peptides and small proteins.
Silica:
Sperical, high purity (<10 ppm metals)
Pore size:
300Å
Particle size:
3, 5 and 10 µm
Pore volume:
0.9 ml/g
Surface area:
105 m²/g
Phase structure:
Monomeric and fully endcapped
% Carbon:
4.0%
Highly controlled chemistry of monolayer formation and end-capping
Extremely high column-to-column reproducibility
High selectivity and efficiency for separations
Full coverage bonded silica packing to achieve the exceptionally high stability
Suitable for separations of acidic, neutral and basic organic compounds, such as pharmaceuticals, peptides, and organic acids
[1] Guard column [2] Guard Cartridge only. [3] Guard Cartridge with holder. [4] One-piece PEEK coupler, recommended to connect columns in series. [5] PEEK/Stainless Steel coupler, recommended to connect columns of IDs > 7.8 mm in series. [6] Column coupler with 10cm length flexible tubing,10-32 fitting with 1/16 OD PEEK tubing. Recommended to connect analytical columns in series [7] 0.5 µm PEEK frit for column with particle size 3 µm or less [8] For Precolumn Filter (0.5 µm) 5 units/pk
[1] Guard column [2] Guard Cartridge only. [3] Guard Cartridge with holder. [4] One-piece PEEK coupler, recommended to connect columns in series. [5] PEEK/Stainless Steel coupler, recommended to connect columns of IDs > 7.8 mm in series. [6] Column coupler with 10cm length flexible tubing,10-32 fitting with 1/16 OD PEEK tubing. Recommended to connect analytical columns in series [7] 2 µm PEEK frit for column with particle size 5 µm and 10 µm. [8] Intended for use with column IDs ≥ 21.2 mm [9] For Precolumn Filter (2 µm) 5 units/pk [10] SS Refill Frits for 102020-21200, 5 units/pk
[1] Guard column [2] One-piece PEEK coupler, recommended to connect columns in series. [3] PEEK/Stainless Steel coupler, recommended to connect columns of IDs > 7.8 mm in series. [4] Column coupler with 10cm length flexible tubing,10-32 fitting with 1/16 OD PEEK tubing. Recommended to connect analytical columns in series [5] 2 µm PEEK frit for column with particle size 5 µm and 10 µm. [6] Intended for use with column IDs ≥ 21.2 mm [7] For Precolumn Filter (2 µm) 5 units/pk [8] SS Refill Frits for 102020-21200, 5 units/pk
